Paper Cutters

(Please click on the Blue buttons for more information)

Martin Yale 7000E PowerLine Table-Top Commercial Cutter

  • Cuts a stack of paper up to 12" wide and 1 1/2" thick.

  • Includes all the heavy-duty features needed to cut large stacks of paper.

  • Heavy-duty wood base.

  • Tabletop cutter ideal for photo shops, schools, small print shops, and businesses.

  • Adjustable paper jogger.

 

 

 

 

MBM Trimuph 4700 Manual Cutter

  • Soligen steel blade

  • solid steel blade carrier and adjustable blade guides

  • extra large cut lever requires minimal effort

  • spindle clamping system applies even pressure along entire cutting width

  • spindle-guided back gauge with calibrated crank

  • precision back gauge measuring scale on front table

  • all-metal construction

  • optional stand (shown)

  • UL and C UL approved

Triumph 4810 D Semi-Automatic Paper Cutter

  • Electric blade drive

  • Solingen steel blade

  • Solid steel blade carrier and adjustable blade guides

  • Spindle clamping system applies even pressure along entire cutting width

  • Dual side guides on front and rear tables

  • Spindle-guided back gauge with calibrated crank, narrow separations, and plastic gliders

  • Precision back gauge measuring scale on front table

  • All-metal construction

  • Stand with storage shelf

  • UL and C UL approved

Triumph 6550 EP Fully Automatic Cutter

  • 25 1/2 inch cutting width accommodates parent stock

  • Programmable "EP" back gauge control module with LED display stores 99 programs (up to 99 steps each) and frequently used measurements

  • Digital measurement readout in cm or inches (accurate to 1/10 mm or 1/100 inch)

  • Control module features repeat cut and eject functions

  • Electric blade, clamp, and back gauge drive

  • Solingen steel blade

  • Solid steel blade carrier and adjustable blade guides

  • Automatic clamp applies even pressure along entire cutting width and can be lowered or raised independently from blade

  • Dual side guides on front and rear tables

  • Spindle-guided back gauge with narrow separations and plastic gliders

  • Electronic hand wheel with variable speed control for manual back gauge setting

  • Bright, LED optical cutting line

  • All-metal construction

  • Stand with storage shelf

  • UL and C UL approved

Martin Yale 7000E PowerLine Table-Top Commercial Cutter is suitable for use by photo shops, schools, small print shops, and businesses. It can cut a full 12 inch depth and a stack of 1 1/2 inch of 20 pounds paper which is approximately 350 sheets. Its paper stop is adjustable and a positive clamp holds the paper in place, which eliminates shifting and tearing. The Martin Yale 7000E PowerLine Table-Top Commercial Cutter features a safety blade latch that prevents cutting until it has been released. The precise English and Metric rule guides aid in accurate cutting.

MBM Trimuph 4700 Manual Cutter

Hinged, transparent safety guard on front table (locks automatically while cutting); transparent safety cover on rear table; safety catch (locks blade lever in up position); blade change from front without removing machine covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; cutting stick can be turned or changed from outside of machine..

The Semi-Automatic Triumph 4810 D Paper Cutter has electronically controlled blade drive and true two-hand operation. Dual side guides are located on both the front and rear tables of the cutter, allowing for exact positioning of even the smallest stock sizes. The manual spindle clamp on the top of this MBM cutter applies even pressure along the entire cutting width, up to 18-7/8 inches. The spindle-guided back gauge has a calibrated crank with a measuring scale, providing you with precise measurements of the back gauge. The narrow separations and plastic gliders ensure that your paper stock will receive no damage and allow for smoother repositioning possibilities.
       Make an accurate cut without fail with the digital display measurement read out and LED optical cutting line, which both indicate the exact position of your cut. These features will also help to perfectly position trim marks. Cut up to a height of 3 inches with the German manufactured Solingen steel blades. For your safety, Triumph 4810 D offers “SCS” safety features, a safety cover on the front and rear table, a safety key to lock the blade, and disk brake function to immediately stop the knife.

Trimuph 6550 EP Fully Automatic Cutter

For wider paper cutting projects, the Triumph 6550 EP paper cutter is the best choice. This MBM cutter has a cutting width of 25-1/2 inches to accommodate parent stock. With a programmable “EP” back gauge control module that will store up to 99 programs, up to 99 steps each, the Triumph 6550 EP guarantees optimal success in every cutting project. The 10 button keypad is easy to use and program your frequently used measurements. The digital display measurements can be read in either centimeters or inches, proving to be accurate to 1/10 of a millimeter or 1/100 of an inch.
       The Triumph 6550 EP is all metal constructed and includes a stand with a shelf for your extra storage for your knife changing tools. With the LED optical cutting line that reveals exactly where the cut will be made, as well as standard “SCS” comprehensive safety package, this MBM cutter ensures that your cutting job will be accurate and never hazardous.
       The cutting blade, clamp, speed control, and back gauge drive are all electric in the Triumph 6550 EP paper cutter. The automatic clamp, which can be moved up or down independent of the blade, is guided on both sides of the cutter to apply an even amount of pressure along the entire cutting width. Narrow separation and plastic gliders on the back gauge provide more assurance that your paper stack will remain damage free and can be repositioned smoothly. This paper cutter also allows you to reference any programmed measurement using the “set” function program.

© ABM Fort Myers. Proudly created with Wix.com